Installation instructions for the Memtest86 USB key image (Linux Only).
=======================================================================

1) Insert a USB key into a USB slot.
2) Determine which device the USB key is assigned as (ie. /dev/sdc).
3) As root type: dd if=memtest86-<ver>.usb of=dev where dev is the device
the key is assigned to. Use the base device (ie. /dev/sdc) not a partition
designation (ie. /dev/sdc1).

Warning: all data on the USB key will be lost. 
Warning Warning: Make sure that the device used in the dd command above
is correct!!!
